So for anyone thinking about removing the wing tanks, it really isn’t that hard. Ok the Starboard side isn’t really that hard. Remove all of the panelling, remove about 100 screws around the top of the tank. They hold it down to the fiberglass box that it is fit into. Cut the front of the box away. Use a come-along from the cockpit, hooked into the top of the inspection plate on the tank and pull. It will slowly release itself from the foam it is bedded in and then you can pull it out through the cockpit sole. The port tank however will require a bit more work as you need to remove the exhaust, a bunch of other fittings and hoses and crap and then repeat the same process. I will let you know how it goes after I have it out.